Proformance FloorsRepair and prep.
Coating removal, crack and joint repair, hydraulic and polymer cement, uneven slabs brought back to level, and full slab profiling. The prep is the job. Everything on top depends on it.
Most floor failures are prep failures.
A coating that peels, a polish that will not shine, a patch that lifts. Almost every one traces back to a slab that was never properly opened, repaired or flattened before the finish went down.
Proformance runs a Husqvarna PG 820 diamond grinder that weighs over a thousand pounds, tied to a Husqvarna HEPA vacuum system. Old coatings, adhesives, paint and laitance come off, the concrete is profiled to the right texture, and the work area stays virtually dust free while it happens.
Cracks, joints and spalls get repaired with the right material for the movement. Low spots and uneven slabs are ground or filled to level. Then the finish, whatever it is, has something to hold onto.
- Removal
- Epoxy, paint, adhesive, thin set, laitance
- Repair
- Cracks, joints, spalls, pitting, low spots
- Materials
- Hydraulic cement, polymer cement, epoxy fillers
- Equipment
- Husqvarna PG 820 grinder, Husqvarna HEPA vacuum
- Pricing
- Quoted with the finish, or standalone
How it goes in.
The order matters. Every step exists because skipping it shows up later.
- InspectThe slab gets looked at in person. Moisture, cracks, soft spots, old coatings and levels all get checked.
- RemoveCoatings and adhesives come off with the grinder or a PCD tooling pass.
- RepairCracks and joints are routed and filled. Spalls and low spots get hydraulic or polymer cement.
- ProfileThe slab is ground to the surface texture the finish needs. Polishing and coatings need different profiles.
- CleanHEPA vacuumed, so the finish goes on a clean, dry, open slab.
Repair and prep we have done.
The other systems.
Polished concrete
Grind, hone, densify and polish. A dusting, pitted slab becomes a hard, sealed, reflective floor that cleans with a mop and holds up for years.
Industrial coatings
Epoxy, polyurea, polyaspartic, urethane and MMA. Chemical resistance, impact resistance and fast return to service, with line striping and safety texture.
Metallic and decorative
Metallic epoxy, stains and dyes for lobbies, showrooms, restaurants and retail. Industrial durability underneath, a finish people notice on top.
Grind and seal
A fast, affordable upgrade for a bare or dusting slab. Diamond ground clean and flat, then sealed so it stops dusting and cleans easily. The most cost effective floor we do.
Concrete rehab
Cracked, pitted, spalled or uneven concrete brought back to a sound, flat, usable slab. Repair first, then whatever finish you want on top.
Safety floors and striping
Slip resistant floor systems and durable safety striping for aisles, dock zones, pedestrian lanes, wash bays and hazard areas.
Driveway wash and seal
Driveways, walks, patios and pool decks pressure washed, repaired where needed, and sealed so water, oil and salt stay on the surface.
Every review, five stars.
Craig and his son-in-law Jared did a great job of prepping our garage floor and installing the epoxy with colored flakes. We were very happy with the work as well as how quickly they were able to start the work following the quote.
Craig and his team did an outstanding job epoxying our garage floor. He was also prompt with correcting a few minor issues after the job was done. We give Proformance Floors our highest recommendation.
Will use Proformance floors again and recommend them to anyone needing a flooring treatment. Mr. Simon was very quick to get a quote to me, and without the mark up that a few other installers quoted me. The quality and price are unmatched.
Repair and prep questions.
Can you fix an uneven slab?
Can you remove an old epoxy or tile adhesive?
Is the grinding dusty?
Do you do prep only, if someone else is finishing?
Let's talk about your floor.
Tell us what you have and where it is. We will come look at it, tell you what it needs, and give you a number.
Or call (520) 381-9229
craig@proformancefloors.com